1. Product introduction:
In the process of the EOD bomb disposal team, if the EOD location is in the center of the city or a key department, the use of detonation treatment often brings extremely serious consequences, and the manual EOD will bring extremely serious consequences to the personal safety of the security inspection and EOD personnel. Big threat. In a variety of complex situations, in order to protect the personal safety of EOD personnel, the risk of EOD should be reduced as much as possible. After many in-depth exchanges and experiments, our company‘s technical R&D personnel and front-line EOD personnel successfully developed the "ZJSC-90S Long-distance Video Electric Thread Cutter".
Compared with the current similar equipment wire cutters (wire cutters), this equipment can operate remotely and observe the cutting situation of the front end in real time. The work is safer and more reliable, and it makes up for the gap of long-distance wire cutting and exhaust explosion. It has been recognized and praised by many EOD experts.

2. Product description:
If the EOD is not sure whether the selected wire to be cut is correct, use a remote video electric thread cutter to perform the cutting operation.
Even if the EOD personnel make correct judgments and choices, the long-distance video electric thread cutter is used to implement cutting, which will greatly reduce the risk of accidental explosion probability, maximize the safety of EOD bombers, and speed up the discharge. The speed of explosive bomb disposal improves the ability to deal with emergencies.
 
3. Product use:
The connecting wires are cut off through control instructions, and the "open, semi-open" non-standard explosive device is subjected to limited damage, making it completely invalid.

4. Product features:
1. Small size, light weight and easy to carry
2. Long-distance video operation, real-time view of the front-end trimming situation, safe and reliable work
3. Video storage, real-time recording of the front-end trimming situation, and later video can be retrieved for viewing (optional)
4. Wired control, can work when the jammer is turned on
5. Able to cut 4 mm diameter cables
6. The specially designed wire-hanging groove is not suitable for disconnection
7. Nano ceramic blades to prevent the danger of conduction
8. Simple operation, no special training required
9. One key operation, easy to use
10. Can be used with robots
 
Five, technical parameters:
1. Mode of operation: manual electric
2. Rear display: 4.3 inch TFT display
3. Video storage: 8GB storage space, expandable to 64GB (video storage is optional)
4. Working distance: more than 30 meters
5. Length of thread cutter: 34cm
6. Strong cutting ability: 4 mm cable
7. Thread cutter size: (length x width x height): 340mmx45mmx45mm 8. Thread cutter weight: 1kg
8. Box size: 51mm×43mm×20mm (length×width×height)
9. Overall weight: 8.8kg