The main body of the retractor is combined with high-strength seamless steel pipe and bracket.

1. Product assembly:
    The main body and the bottom support of the product are separated during transportation. After receiving the goods, the bottom support rod is connected with the two connecting rods on the main body and fixed with bolts.

2. Product features:
    The product supports 45-50° angle adjustment. The product can collect all bullets within the sixth public security level (including the sixth level).

3. Product specifications:
    The total mass is ≤60kg/set, the external size of the main body is ≥910x410mm, the inner diameter of the bulletproof device is 100±2mm, and the outer diameter is 135±1mm.

4. Instructions for use:
    Before using the bulletproof device, make sure that the main body is equipped with fine sand, generally 300-400mm high, and then put the 15mm thick rubber pad in the packing box into the retractor for use.

5. Matters needing attention:
    The rubber pad in the bulletproof device must be replaced after 5 shots of live ammunition.
6. Accessories:
    A 6mm wrench and 2 gaskets.