˜ Multi-function & wide detection frequency range
This machine can measure various wireless devices in the range of 50 MHz ~ 6.0 GHz, including GSM mobile phones, smart phones, wireless networks, wireless listening devices, wireless analog and digital cameras, etc.
˜ Reliable preset reference point
The "preset reference point" of this machine is the crystallization of the company‘s many years of technology, which can be applied to all parts of the world. With ordinary detectors, users cannot determine the true reference point, in other words, do not know whether there is any abnormal electric wave. The reference point set by the detector is incorrect, which will affect the detection result.
 
Each time the machine is turned on, it will do a self-test. At the center of the front of the machine, there is a seven-segment display, which finally stays at the 6 position, which is the default sensitivity reference of the machine. At this time, if several indicator lights are on and there are beeps/vibrations at the same time, it means that the environment where the unit is used, radio waves are emitting, or the environment is noisy.
 
With the new function of this machine‘s "preset reference point", users will no longer be troubled by setting too high or too low sensitivity. This machine can provide reliable detection results in any environment.
 
˜ Simple and easy-to-use operation
This machine applies the newly invented digital sensitivity adjustment technology to display the standard of sensitivity in digital. The user can directly see the currently set sensitivity level by pressing the "up" (▲) and "down" (▼) buttons.
 
The two new technologies, "Digital Sensitivity Adjustment Technology" and "Digital Display Sensitivity Benchmark", bring great convenience to users, and are also very helpful for finding the location of the signal source. The user will not cause the detector to be too sensitive or too blunt due to improper adjustment, resulting in poor detection results.

˜ Electric wave intensity display
When radio waves are detected, the machine will light up from green light à yellow light à red light according to the strength of the radio wave. The stronger the radio wave, the more lights will be on.
˜ Simple and clear display
Multiple warning methods
When radio waves are detected, the machine has multiple warning methods, 9 LEDs, beeps or vibrations to remind users.
 
Identify the signal type
This machine can help users easily identify the type of radio wave: analog or digital.
Analog radio waves: wireless bugs, wireless pinhole cameras, walkie-talkies... etc.
Digital radio waves: wireless networks, IP cameras, digital wireless cameras, mobile phones, GSM bugs, 3G cameras, etc.
 
˜ Lens Scanner-Detect wired and wireless camera lens
This machine can be connected to an external lens scanner. The 8 super bright lights on the front illuminate the location where a pinhole camera may be installed. Move the lights slowly up, down, left, and right, paying attention to points with strong reflections. When the illuminating light moves, the reflected light is fixed, most likely it is the camera lens.
 
By observing the reflected light through the viewfinder, it is easier to confirm the camera lens. The camera scanner can find even hidden wireless cameras that have been turned off.

˜ Standby registration signal detection
When the signal strength of the base station is weakened, the mobile phone will automatically scan the base station again for a new registration. The base station will also actively send a signal to the mobile phone to notify the mobile phone to send a signal to register. The time and number of registration intervals depend on different communication systems and mobile phones.
This device can measure the signal registered by the mobile phone.
 
˜ Detect 3G 2100
3G 2100 is the most widely used mobile phone system, including voice communication and data transmission. Where the 4G system signal is poor, the system will automatically switch to 3G 2100. This machine has a simple 3G 2100 detection module, and the detection distance is as far as 3 meters, which is beyond the reach of other brand detectors. (3G, 4G detection distance varies according to the strength of the base station signal)
~ Semi-directional antenna
This machine has the characteristics of semi-directionality. When the sensitivity is gradually reduced to get closer to the signal source, the sensing angle of the detector gradually narrows from 120 degrees wide. When looking for a signal source, this feature is very effective in helping to find the signal source.

˜ Found GSM / 3G / 4G / WiFi bug and pinhole camera
This machine can detect and find new bugs and pinhole cameras that apply GSM / 3G / 4G / WiFi technology and can be remotely operated by mobile phones.